PROJECT SPOTLIGHT

Skylift 3-Axis Welding Positioner

Project summary

MWES designed and built a 3-axis servo welding positioner as part of a large trash dumpster bin assembly line.

The Challenge

Running welding operations on large, heavy parts requires a way to reposition the part to reach all the desired spots where the welding needs to be performed. Traditionally an overhead crane would be used however, cranes can be hazardous to the workers and are difficult to position consistently. This firm approached MWES to produce a common device to pick it up and orient the large bins weighing 600-1,000 lbs. without the use of a traditional crane. 

The Solution

For our customer, MWES produced a floor-mounted 3-axis Skylift servo positioner and the applicable fixturing. The Skylift includes several part manipulator systems that accommodate both the operator for assembly functions and a welding robot for additional welding of large parts with no need for a traditional crane. 

The Skylift positioner mounting platter can accommodate parts as heavy as 8,000 lbs and provides 360 degrees of rotation while the positioner arm can perform up to 180 degrees of rotation. The positioner arm and mounting platter axis are designed to be an external axis for a robot, which allows true coordinated motion with a welding robot. The ground cabling along with other required cables and tubing are routed through the center of the rotational axis and the lift axis has up to a 60-inch travel range.

Impact to the Customer

By eliminating the crane, the material handling time was cut in half and the safety of the overall system was increased to an operation that did not require certification for hoists, swinging mass, or operators to control and verify the safety during the positioning activities.

Midwest Engineered Systems has a wide range of experience in integrating welding positioner systems. If you’re looking to improve your assembly line throughput, we have the knowledge and experience to make the project a success.

Contact us to learn how Midwest Engineered Systems can automate even your most complex and challenging operations today!

Innovation Through Automation

Related Projects

3-Phase Transformer Cover Weld Cell

MWES designed and built a completely automated robotic...

Aerial Lift Weldments Automation

MWES provided this manufacturer with two robotic welding...

Automated 3-piece Pipe Weld Cell

MWES provided this firm with an automated 3-piece weld...

Automated Spot Welding Assembly

MWES built a resistance spot welding automation cell...

Concrete Mixer Drum Welding Line

MWES provided this manufacturer with a robotic automation...

Laser Welding System for Rail Car Panels

MWES provided a rail equipment builder with a large-scale...

Pressure Vessel Head Welding Cell

MWES provided this industrial equipment manufacturer...

Robotic Frame Welding Automation

MWES provided this manufacturer with a robot welding...

Robotic Light-Gauge Truss Welding Cell

MWES provided this structural steel manufacturer with...

Robotic Weld Vessel Automation

MWES designed and built an automated robotic weld cell...

Robotic Welding & Milling for High-Speed Handling of Bus Bars

MWES provided this firm with a robotic automation system...

Robotic Welding & Positioner System

MWES provided this firm with a fully automated robotic...

Skid Steer Welding Automation

The robotic weld cell that MWES provided to our customer...

Skylift 3-Axis Welding Positioner

This project consists of a MWES standard Robotic Welding...

Tube Cover Automated Welding System

MWES provided this firm with an automated welding machine...